EIS_GETWINDATA - a wrapper to the EIS objects#

The EIS data are stored in IDL objects, and all information about the data can be accessed through object methods. However, sometimes it is convenient for the user to dump a particular wavelength window to an IDL structure, together with useful information such as pointing coordinates, start time, exposure time, etc.

The routine that does this is called eis_getwindata and an example of how to call it for the Fe XII 195 data window is given below.

IDL> d=eis_getwindata('eis_l0_20070202_104212')
% EIS_GETWINDATA: no window number input, select one . . .
 iwin             line_id   wvl_min   wvl_max
    0        FE X 174.530    174.36    174.70
    1        FE X 175.260    175.10    175.43
    2        O VI 184.120    183.95    184.29
    3        FE X 184.540    184.38    184.71
    4     FE VIII 185.210    185.05    185.38
    5      FE XII 186.880    186.72    187.05
    6       FE XI 188.230    188.06    188.39
    7     CA XVII 192.820    192.65    192.98
    8      FE XII 193.510    193.34    193.67
    9      FE XII 195.120    194.94    195.28
   10     FE XIII 202.040    201.87    202.21
   11     FE XIII 203.830    203.65    203.99
   12       HE II 256.320    256.15    256.49
   13      FE XVI 262.980    262.83    263.17
   14      FE XIV 264.780    264.63    264.97
   15       MG VI 268.990    268.84    269.17
   16      FE XIV 274.200    274.05    274.38
   17      SI VII 275.350    275.20    275.54
   18        O IV 279.930    279.78    280.12
   19       FE XV 284.160    284.01    284.34
Select a window to read [0...19]> 9
IDL> help,/str,d
** Structure <2974204>, 19 tags, length=8397328, data length=8397322, refs=1:
   FILENAME        STRING    'eis_l0_20070202_104212.fits.gz'
   LINE_ID         STRING    'FE XII 195.120'
   INT             FLOAT     Array[16, 256, 256]
   ERR             FLOAT     Array[16, 256, 256]
   WVL             DOUBLE    Array[16]
   TIME            FLOAT     Array[256]
   TIME_CCSDS      STRING    Array[256]
   EXPOSURE_TIME   FLOAT     Array[256]
   SOLAR_X         FLOAT     Array[256]
   SOLAR_Y         FLOAT     Array[256]
   NL              LONG                16
   NX              LONG               256
   NY              LONG               256
   SCALE           FLOAT     Array[2]
   UNITS           STRING    'DN'
   MISSING         INT           -100
   IWIN            LONG                 9
   HDR             STRUCT    -> <Anonymous> Array[1]
   TIME_STAMP      STRING    'Fri Jul  6 08:44:52 2007'
IDL> plot_image,sigrange(total(d.int,1))

The resulting image is below. The routine also works on level1 data processed with eis_prep. More information is available in the header.



PLOT_EIS_RASTER - plotting data from eis_getwindata#

I have done a small program "plot_eis_raster.pro" where you can visualize the structure with the coordinates, time and name of the window.

plot_eis_raster.pro is just valid for the slit rasters (I haven't tried with any slot).

A few comments: the time that it shows is the time of the beginning of the raster; and the coordinates is calculated using the mean value of d.solar_x and using the size of the slit per each pixel. To use it you just have to (for the same example than before):

IDL> plot_eis_raster,d

Or if you want to change the value to plot (e.g. the values that you obtain after fit the line)

To plot the array called velocity (in my case velocity=reform(result(1,*,*)) ):

IDL> plot_eis_raster,d,value=velocity

Also you can use all the keywords of plot_map (dmin, dmax, etc.)

And you can save the map produced,

IDL> plot_eis_raster,d,value=velocity,map=velocitymap

-David Pérez-Suárez, 26 Sep 2017

Operations on WINDATA structures#

There are a number of routines available for performing operations on WINDATA structures. The full set are listed in EIS Software Note #21.

Spatial binning (EIS_BIN_WINDATA)#

Sometimes it is useful to perform spatial binning on EIS data in order to improve photon statistics on the emission lines. The routine eis_bin_windata is available in Solarsoft which takes the output from eis_getwindata and performs binning in the X and/or Y directions while preserving the form of the eis_getwindata structure. Errors on the intensities at each of the binned pixels are correctly calculated.

The routine is called as, e.g.,

IDL> wd=eis_getwindata(l1name,195.12)
IDL> wdnew=eis_bin_windata(wd,xbin=2,ybin=2)

Joining two WINDATA structures (EIS_JOIN_WINDATA)#

Takes two WINDATA structures from a data-set and joins them in the wavelength dimension to produce a single, new WINDATA structure. This is most useful if the two WINDATAs are directly adjacent on the detector.

IDL> wd1=eis_getwindata(l1name,184.54)
IDL> wd2=eis_getwindata(l1name,185.12)
IDL> wd=eis_join_windata(wd1,wd2)

Correcting data arrays for orbit variation and slit tilt (EIS_SHIFT_SPEC)#

The wavelength scale for individual spatial pixels changes across the raster due to the thermally-induced, orbital drift of line centroids and the EIS slit tilt. The routine EIS_SHIFT_SPEC takes an array of wavelength corrections, and interpolates the intensity and error arrays such that the same wavelength scale applies to each spatial pixel. Due to complications of interpolating over missing pixels, the /refill option should be used in the call to eis_getwindata.

IDL> eis_wave_corr_hk, l1name, wvl_corr
IDL> wd=eis_getwindata(l1name, 195.12, /refill)
IDL> wd_new=eis_shift_spec(wd,wvl_corr)

Trimming the wavelength range of a windata structure (EIS_TRIM_WINDATA)#

This routine is intended for WINDATA structures with a large wavelength coverage; most commonly this will be full CCD data. An example use is when EIS_AUTO_FIT is to be run on just a single emission line within a full CCD spectrum. By trimming the wavelength coverage of WINDATA to just including the wavelength region around the line of interest, the spectrum becomes easier to fit. The usage is as follows for the case where Fe XII 195.12 is to be studied:

IDL> wd=eis_getwindata(l1name, 195.12, /refill)
IDL> wd195=eis_trim_windata(wd,[194.12,196.12])

Here a +/- 1 angstrom band around the line of interest is extracted.

Add new attachment

Only authorized users are allowed to upload new attachments.

List of attachments

Kind Attachment Name Size Version Date Modified Author Change note
jpg
plot_image.jpg 27.3 kB 1 06-Jul-2007 13:52 Harry Warren
jpg
plot_imageCoord.jpg 21.3 kB 2 07-Jul-2007 12:16 David Pérez-Suárez
jpg
plot_imageCoordValue.jpg 22.9 kB 3 07-Jul-2007 12:51 David Pérez-Suárez
« This page (revision-13) was last changed on 07-Dec-2016 14:14 by Peter Young